hbs61215 mega travel drive shafts

Use this forum to ask questions, post comments, or other Store related topics.

Moderator: Moderators

Post Reply
User avatar
tedfrk
Savage Newbie
Savage Newbie
Posts: 9
Joined: Sat Aug 25, 2007 11:00 pm
Contact:

hbs61215 mega travel drive shafts

Post by tedfrk » Thu Sep 13, 2007 8:36 pm

i just purchased a set of these and the stock wheel nuts will not work with these and nothing in the store said anything about having to get different nuts i am very disappointed after spending almost 60.00 bucks on them not sure if i will shop here anymore i have spent alot of money here so far

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
Squid
Site Admin
Site Admin
Posts: 7147
Joined: Sat Aug 23, 2003 11:00 pm
Location: Upstate NY
Contact:

Post by Squid » Thu Sep 13, 2007 10:20 pm

Which savage do you have? The newer Savages have the same threads all the way around. The older savages all the way up to the 4.6SS used regular thread on the right side of the truck and a left hand thread on the left. I am not sure about the .25X RTR or the XSS Kit though as I haven't owned one of those. But one set of your stock nuts should work on 2 of these even if you have the newest savage out the X 4.6RTR.

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
tedfrk
Savage Newbie
Savage Newbie
Posts: 9
Joined: Sat Aug 25, 2007 11:00 pm
Contact:

Post by tedfrk » Thu Sep 13, 2007 10:30 pm

i have the 4.6 x ss there all the same clockwise to tighten

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
Squid
Site Admin
Site Admin
Posts: 7147
Joined: Sat Aug 23, 2003 11:00 pm
Location: Upstate NY
Contact:

Post by Squid » Fri Sep 14, 2007 2:07 pm

2 of your stock nuts should work. The threads are the same size, but 2 of your new CVDs wil need these. Sorry for the inconvienence, the description for the CVD's was written when all savages had different threads on each side of the truck.

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests