savage x 4.6 to brushless

This forum is dedicated to discussion regarding the HPI E-Savage.

Moderator: Moderators

Post Reply
darryl1980
Savage Extraordinaire
Savage Extraordinaire
Posts: 931
Joined: Mon Jul 26, 2010 11:00 pm
Location: Somewhere In The USA

savage x 4.6 to brushless

Post by darryl1980 » Fri Jul 29, 2011 4:33 pm

i am looking into converting my hpi savage x 4.6 into a brushless what parts would i need?

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
nitrotrippertje
Savage Extraordinaire
Savage Extraordinaire
Posts: 1379
Joined: Sat Jul 19, 2008 11:00 pm
Location: Amersfoort The Netherlands (soesterkwartier)

Post by nitrotrippertje » Fri Jul 29, 2011 4:43 pm

Team DBC teamdriver
FLM EXT P3.28, hotbodies Twinzilla P3.28, S-25 P3.28
Hotbodies lightning pro2 buggy picco P3.28
Hongnor X2 CRT lightweight P7R EVO3 EDO mod/Werks 2057
Hongnor X2 CRT lightweight Werks B5/2013

Link:
BBcode:
HTML:
Hide post links
Show post links

darryl1980
Savage Extraordinaire
Savage Extraordinaire
Posts: 931
Joined: Mon Jul 26, 2010 11:00 pm
Location: Somewhere In The USA

Post by darryl1980 » Fri Jul 29, 2011 5:25 pm

what else would i need to buy besides that kit?

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
nitrotrippertje
Savage Extraordinaire
Savage Extraordinaire
Posts: 1379
Joined: Sat Jul 19, 2008 11:00 pm
Location: Amersfoort The Netherlands (soesterkwartier)

Post by nitrotrippertje » Fri Jul 29, 2011 6:03 pm

You need 2 good lipo,s and a good lipo charger.
But i would just get a flux 2350 or flux insted of converting and run the nitro and if anything breaks run the flux so you get best of both worlds.
The conversion kit is allmost the same value as a used flux so i know what i would do....
Team DBC teamdriver
FLM EXT P3.28, hotbodies Twinzilla P3.28, S-25 P3.28
Hotbodies lightning pro2 buggy picco P3.28
Hongnor X2 CRT lightweight P7R EVO3 EDO mod/Werks 2057
Hongnor X2 CRT lightweight Werks B5/2013

Link:
BBcode:
HTML:
Hide post links
Show post links

darryl1980
Savage Extraordinaire
Savage Extraordinaire
Posts: 931
Joined: Mon Jul 26, 2010 11:00 pm
Location: Somewhere In The USA

Post by darryl1980 » Fri Jul 29, 2011 6:22 pm

the problem is my nitro wont start it just sits in my bedroom.

Link:
BBcode:
HTML:
Hide post links
Show post links

darryl1980
Savage Extraordinaire
Savage Extraordinaire
Posts: 931
Joined: Mon Jul 26, 2010 11:00 pm
Location: Somewhere In The USA

Post by darryl1980 » Fri Jul 29, 2011 6:28 pm

plus i have lost interest in my nitro is why i am looking to convert it to brushless.

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest