ESC LVC Question

This forum is dedicated to discussion regarding the HPI Savage Flux HP Brushless Electric Vehicle.

Moderator: Moderators

Post Reply
User avatar
Burrabu
Savage Newbie
Savage Newbie
Posts: 7
Joined: Thu Jul 09, 2015 11:00 pm
Location: SoCal

ESC LVC Question

Post by Burrabu » Sun Jul 19, 2015 6:07 am

Greetings all!
I've been prowling forums with a hunger and chomping down hypertext like a fiend, but I need one more piece of info before piecing it all together:

Does the non-default, customizable ESC's LVC functionality detect the voltage of both battery packs at the same time? Or does it alternate reading between one pack and the other until one of them drops below the set voltage cutoff?  :/

For example, I run two 3s packs. If I set the LVC to 10.5 volts, will it take that as 10.5 for each of my 2 packs and read each pack separately and stop when either of the two packs reaches that voltage, or is it 10.5 for both packs combined?

Thanks in advance for the help!

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
Burrabu
Savage Newbie
Savage Newbie
Posts: 7
Joined: Thu Jul 09, 2015 11:00 pm
Location: SoCal

Post by Burrabu » Tue Jul 21, 2015 8:57 pm

I asked and got the answer elsewhere, thanks anyway.

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 4 guests