steering servo linkage

This forum is dedicated to discussion regarding the HPI Savage Flux HP Brushless Electric Vehicle.

Moderator: Moderators

Post Reply
greywolf123
Savage Newbie
Savage Newbie
Posts: 41
Joined: Tue Nov 27, 2012 12:00 am

steering servo linkage

Post by greywolf123 » Fri Oct 30, 2015 3:34 pm

After everything I have done to my Savage, I am going to eliminate the ugly battery boxes and put the batteries on top in front. I am going to mount the servo under the flm servo plate, on the side of the tvp, but I am going to have to move the servo back about a 1/2in or better. So I am going to need a piece of linkage from the servo to the steering servo saver. Any ideas guys?

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
Squid
Site Admin
Site Admin
Posts: 7139
Joined: Sat Aug 23, 2003 11:00 pm
Location: Upstate NY
Contact:

Post by Squid » Sat Oct 31, 2015 9:37 am

Any rod end that will fit the balls, and a long screw that will securely thread into the rod ends to set the length. I have cut the head off a screw to use in the past.

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 8 guests