Picco .28 p3 shims

Questions about Hop Ups for the Savage.

Moderator: Moderators

Post Reply
ASBURY
Savage Enthusiast
Savage Enthusiast
Posts: 164
Joined: Wed Nov 06, 2013 12:00 am

Picco .28 p3 shims

Post by ASBURY » Tue May 19, 2015 11:54 am

i have a modded Picco right now I have 3 shims on it now  but don't know the size. I am running 30% nitro what size shim or how many you guys would run.

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
LLkoolskillet
Savage Extraordinaire
Savage Extraordinaire
Posts: 5694
Joined: Tue May 17, 2011 11:00 pm

Post by LLkoolskillet » Tue May 19, 2015 6:51 pm

I run all 3, IIRC two are 0.2mm and one is 0.1mm. If your above 4000ft in elevation then I would remove the thinnest but if your under that, then leave all three in place.
[img]http://i1105.photobucket.com/albums/h358/LLkoolskillet2/skillet1.jpg[/img]

Link:
BBcode:
HTML:
Hide post links
Show post links

ASBURY
Savage Enthusiast
Savage Enthusiast
Posts: 164
Joined: Wed Nov 06, 2013 12:00 am

Post by ASBURY » Tue May 19, 2015 7:39 pm

Ok thanks do the shims go bad? Would you recommend me replacing or just keep the ones that are in place? I'm in GA

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar
LLkoolskillet
Savage Extraordinaire
Savage Extraordinaire
Posts: 5694
Joined: Tue May 17, 2011 11:00 pm

Post by LLkoolskillet » Thu May 21, 2015 4:24 am

No they dont go bad, just keep them clean and be very careful not to bend them up. They need to be clean when you install them so they keep a good seal.
[img]http://i1105.photobucket.com/albums/h358/LLkoolskillet2/skillet1.jpg[/img]

Link:
BBcode:
HTML:
Hide post links
Show post links

ASBURY
Savage Enthusiast
Savage Enthusiast
Posts: 164
Joined: Wed Nov 06, 2013 12:00 am

Post by ASBURY » Thu May 21, 2015 2:26 pm

Ok thanks LL

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests