Thanks goes out to MCHSavage for his time and effort in this thread
I've never seen a how 2 of this b4 so sorry if I repeating some1 else...
First what you'll need:
- Fuel Tube
- Sharp knife
- Shock Oil
Then You must dismantle your shocks:
Cut the fuel tubing to the size you want:
Slide the Fuel tube onto the shaft All the way to the TOP:
Insert the shaft Back into the shock casing:
at this point it'll look like this (Limited next 2 stock)
Reassemble the shocks and add your prefered shock oil (I would advise NOT to fill completely):
Stock Next to mod'd
I only added a short piece of fuel tube so there is not that great a difference but it Will lower the truck the same amount...
Before Mod Pic:
After Mod Pic (The Different tyres make a very slight difference)
I also Added thicker shock oil in the shocks I mod'd. ( I have ONLY adjusted the Front)
I hope this Helps some of you guys....
Heres a Pic of my Savage that I've now limited all shocks (now hugs the floor)
Tech tips for the Savage can be found here.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest