i decided i needed a better antenna. i saw the Bru-line at my LHS
tower has them
awesome deal for like $4.
all you need is a 1/4-28 fine thread nut and a 1/4 drill bit.
cut the stock antenna tube bracket off. then i used a table grinde to make it smooth.
drill hole where old mount use to be. NOTE! the old hole is to far from the end to drill the new hole, or else you wont get a nice circle, you have to move more towards the center.
now keep a nut screwed on the antenna and put it in the hole then use the other nut making a sandwich type thing. tighten it nice and tight but keep the bottom as short as possible so it doesn't hit the servo to much
ALL DONE! i think it just looks sweet. and its longer.
Tech tips for the Savage can be found here.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests