3 Speed Manual

Tech tips for the Savage can be found here.

Moderator: Moderators

Post Reply
User avatar
Gonzo Savage
Savage Enthusiast
Savage Enthusiast
Posts: 199
Joined: Sat Nov 12, 2005 12:00 am

3 Speed Manual

Post by Gonzo Savage » Wed May 02, 2007 8:41 pm

I took the HPI 3 speed manual copied the text and uploaded the pics to Imageshack. The only thing missing is truck dissassembly.

Factory Settings
The 2 clutches of both the 87218 and 87220 versions of the three-speed transmission come pre-built. At the factory they set the grub screws in the second gear clutch at 4 1/2 turns out from fully wound in. The grub screw in the third gear clutch is set at 3 turns out from fully wound in.
These are base settings and may not suit your particular equipment set-up so may require adjustment to gain the optimum performance. There are a lot of different combinations that require different settings of these clutches. The settings may need adjusting for the following circumstances:-

Hide post links
Show post links

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest